Vrrp Group-Id Priority Value; Vrrp Group-Id Timers Advertise - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
VRRP GROUP ID PRIORITY VALUE
vrrp <1-8> priority <1-254>
D
ESCRIPTION
This command is used in the Interface Configuration mode. This command is
used to set the priority for the router within a group.
P
ARAMETERS
Parameter
1-8
value
D V
EFAULT ALUE
By default, priority is 100
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# vrrp 7 priority 104
-
VRRP GROUP ID TIMERS ADVERTISE
vrrp <1-8> timers advertise {<1-255>|msec <50-999>}
D
ESCRIPTION
This command is used in the Interface Configuration mode. This command
configures the interval between successive advertisements by the master virtual
router in a VRRP group. The unit is in seconds unless the optional "msec"
parameter is specified.
P
ARAMETERS
Parameter
1-8
1-255
50-999
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Specifies the group number. It is in the range 1 - 8.
Refers to the priority level which ranges between
1- 254.
Description
Specifies the group number. It is in the range 1 - 8.
By default the timer value is configured in seconds.
Its in the range: 1 - 255 seconds.
The timer value can be configured in milliseconds
by using the keyword 'msec'. Its in the range:
50 - 999 milliseconds.
Alcatel-Lucent

vrrp group-id priority value

Description
Beta
145