Show Ip Ospf Border-Routers - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Open Shortest Path First
SHOW IP OSPF BORDER
show ip ospf [<1-65535>] border-routers
D
ESCRIPTION
This command displays the internal OSPF routing table entries to an ABR and
ASBR.
P
ARAMETERS
Parameter
1-65535
E
XAMPLE
ALU# show ip ospf border-routers
Codes : i - Intra-area route, I - Inter-area route
i 6.6.6.6 [100] via 2.2.2.1, GigabitEthernet 7/1, ABR, Area 1,
SPF 5
ALU#
Field
6.6.6.6
[100]
via 2.2.2.1
GigabitEthernet7
/1
ABR
Area
SPF 5
482
Beta
-
ROUTERS
Process ID.
This parameter when specified displays the internal OSPF
routing table entries to an ABR and ASBR for the specified
process ID.
OSPF Process 1 internal Routing Table
Router ID of the destination.
Cost of using this route.
Next hop toward the destination.
Interface type for the outgoing interface.
The router type of the destination; it is either an ABR or
ASBR or both.
The area ID of the area from which this route is learned.
The internal number of the shortest path first (SPF)
calculation that installs this route.
Alcatel-Lucent
Description
Description
OmniAccess 700 CLI Command Reference Guide
Beta