Ip Pim Spt-Threshold - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Multicast Routing
-
IP PIM SPT THRESHOLD
ip pim spt-threshold {<0-4294967>|infinity} [group-list {<1-
99>|<1300-1999>|<standard access-list-name>}
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure the SPT threshold value.
P
ARAMETERS
Parameter
0-4294967
infinity
1-99
1300-1999
standard access-
list-name
D V
EFAULT ALUE
Switch to SPT just after receiving first packet. That means '0' Kbps.
E
XAMPLE
ALU(config)# ip pim spt-threshold 100 group-list 10
518
Beta
Traffic rate in kilobytes per second.
Threshold is configured as infinity, which means never to
switch-over from RPT to SPT.
Standard access-list number.
Standard access-list number.
Name of a specific access list.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta