Ip Rip Authentication Key-Chain; Ip Rip Authentication Mode - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Router Information Protocol
IP RIP AUTHENTICATION KEY
ip rip authentication key-chain <key-chain name>
D
ESCRIPTION
Enter this command in the Interface Configuration mode. This command is used
to associate a key chain to an interface. This enables RIP authentication.
P
ARAMETERS
Parameter
key-chain name
D V
EFAULT ALUE
No authentication is provided for RIP packets.
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# ip rip authentication key-
chain allen

IP RIP AUTHENTICATION MODE

ip rip authentication mode {md5|text}
D
ESCRIPTION
Use the following command in the Interface Configuration mode. This command is
used to configure the authentication mode to be used by the interface (or let it
default mode).
P
ARAMETERS
Parameter
md5
text
D V
EFAULT ALUE
The default authentication mode is Plain Text authentication
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# ip rip authentication key-
chain allen
382
Beta
-
CHAIN
Name of the key chain being associated to the interface.
Keyed Message Digest 5 (MD5) authentication.
Plain Text authentication.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Description
Beta