Organization - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
OmniAccess 700 CLI Command Reference Guide
O
RGANIZATION
The chapters in the CLI Command Reference Guide are organized into following
parts:
P I - I
ART NTRODUCTION
The first part provides an introduction to CLI,
Interface" in Chapter 2. This is a preparatory chapter that describes the CLI
configuration considerations, tools required, an overview of the Command Line
Interface and procedures that should be performed before the actual
configuration.
Chapter 3 "System Configuration and Monitoring"
commands for Inband and Out-of-band management, setting system parameters,
software management, configuration management, AAA services, SNMP, etc.
The various commands include SSH, Telnet, show version, update, show
environment, show mem, show proc, etc.
Chapter 4 "Virtual Router Redundancy Protocol"
commands for Virtual Router Redundancy Protocol (VRRP). These commands
are used to configure VRRP on an interface.
P II - LAN I
ART NTERFACES
Chapter 5 "L3 Interface
Ethernet interfaces.
The Bridging configuration in Chapter 6
L2 switching Configuration on the OA-700. This chapter documents the
commands for Layer 2 switching. These commands are used to configure
switching on the L2 protocols.
Chapter 7 "Per VLAN Spanning Tree +"
switching.
Chapter 8 "Integrated Routing and Bridging"
configure Integrated Routing and Bridging (IRB) on the OA-700.
Chapter 9 "802.1X Port-Based Authentication"
IEEE 802.1X port-based authentication on the OA-700.
Chapter 10
Port Monitoring on the OA-700.
2
Beta
Commands"documents the CLI commands for the
"Port Monitoring" chapter covers the commands used to configure
Alcatel-Lucent
"Using the Command Line
chapter includes
chapter documents the
"Switching on L2 Ports"
details the VLAN commands in
covers the commands used to
documents the commands for
OmniAccess 700 CLI Command Reference Guide
deals with the
Beta