Distance Bgp - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Protocol Independent Features

DISTANCE BGP

distance bgp <1-255> <1-255> <1-255>
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command is used to configure distance for external, internal, and local routes.
P
ARAMETERS
Parameter
1-255
1-255
1-255
D V
EFAULT ALUE
•
external-distance: 20
•
internal-distance: 200
•
local-distance: 200
E
XAMPLE
ALU(config-router bgp AS1)#distance bgp 15 50 10
340
Beta
External Distance - Sets the administrative distance for
BGP external routes. External routes are those routes that
are those learned from a neighbor external to the
autonomous system. You can specify a value between 1 -
255. Routes with a distance of 255 are not installed in the
routing table.
Internal Distance - Defines the administrative distance for
BGP internal routes. Internal routes are those routes that
are learned from another BGP entity within the same
autonomous system. You can specify a value between 1 -
255. Routes with a distance of 255 are not installed in the
routing table.
Local Distance - Administrative distance for BGP local
routes. Local routes are those networks added using the
network command or those that are being redistributed
from another routing protocol. You can specify a value
between 1 - 255. Routes with a distance of 255 are not
installed in the routing table.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta