Priority Bandwidth - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

PRIORITY BANDWIDTH

priority bandwidth {<101-700000000>|percent <1-100>}
D
ESCRIPTION
This command is entered in the class mode. This command is used to set the
traffic class as a priority class and configure bandwidth for the same.
Note: You cannot mix the absolute bandwidth command with percentage bandwidth
command across policy hierarchy.
P
ARAMETERS
101-700000000
1-100
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-pmap-P1-C1)# priority bandwidth 101
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
The absolute bandwidth (bps) value.
The bandwidth in percentage.
Beta
priority bandwidth
789