Show Ip Dhcp Pools - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
DHCP (Dynamic Host Configuration Protocol) Server

SHOW IP DHCP POOLS

show ip dhcp pools [<pool-name>] [vrf <vrf-name>]
D
ESCRIPTION
This command shows all the pools and their configured options.
P
ARAMETERS
pool-name
vrf-name
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# show ip dhcp pools
Pool Name
Pool Host Address
Pool Host Mac Address
Pool Name
Pool Network Number
Pool Network Mask
Number of leases
Pool Range
Boot-File Name
ALU(config)# show ip dhcp pools p2
Pool Name
Pool Host Address
Pool Host Mac Address
R H
ELEASE ISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
840
Beta
Parameter
:
:
:
:
:
:
:
:
:
:
:
:
Alcatel-Lucent
Description
Shows the details of only the specified
pool name.
If the VRF name is specified, it displays
all the pools and their options configured
for the specified VRF. If the VRF is not
specified, it displays all the pools and
their options configured for the Default
VRF.
p2
1.2.3.66
11:22:aa:bb:55:ff
p1
1.2.3.0
255.255.255.0
50
1.2.3.50 / 1.2.3.100
boot_image
p2
1.2.3.66
11:22:aa:bb:55:ff
OmniAccess 700 CLI Command Reference Guide
Beta