Crypto Signed-Cert; Dpd Interval - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

CRYPTO SIGNED
crypto signed-cert <name> delete
D
ESCRIPTION
This command deletes the specified signed certificate.
P
ARAMETERS
name
E
XAMPLE
ALU(config)# crypto signed-cert cert_Simpson delete

DPD INTERVAL

dpd {interval <5-3600> [timeout <5-72000>]|none}
D
ESCRIPTION
This command configures a DPD at the crypto map mode. This command allows
all connections associated with a crypto map to use a DPD policy that is different
from the global policy.
P
ARAMETERS
5-3600
5-72000
none
D V
EFAULT ALUE
The default value for DPD timeout is three times that of the DPD interval specified.
E
XAMPLE
ALU(crypto-map-map1)# dpd delay 15 timeout 60
ALU(crypto-map-map1)# dpd NONE
OmniAccess 700 CLI Command Reference Guide
Beta
-
CERT
Parameter
Parameter
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
Name of the specified signed certificate.
Description
Time in seconds for which the keep-alive
messages will be sent.
Time in seconds after which the peer will
be declared to be dead.
This keyword disables DPD for all the
connections associated with a crypto
map. These connections will not detect
Dead Peer.

crypto signed-cert

661
Beta