Show Controller - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
T1E1 Line Card

SHOW CONTROLLER

show controller
D
ESCRIPTION
This command displays controller status that is specific to the controller hardware.
The privileged EXEC show controllers T1 command displays the status of T1
controllers and displays information about clocksources and other settings for the
ports.
P
ARAMETERS
None.
E
XAMPLE
ALU# show controller
T1 1/0 is administratively down.
T1 1/1 is administratively down.
T1 1/2 is up.
Line Card type is Channelized T1
Cablelength is long 0db
No Alarm Detected
Framing is esf, Line Code is b8zs, Clock Source is internal
Total Data (Since last clearing of counters)
0 Line Code Violation, 0 Framing Errors
0 Out of Frame, 0 Bit Errors
T1 1/3 is administratively down.
ALU# show controller T1 1/2
T1 1/2 is up.
Line Card type is Channelized T1
Cablelength is long 0db
No Alarm Detected
Framing is esf, Line Code is b8zs, Clock Source is internal
Total Data (Since last clearing of counters)
0 Line Code Violation, 0 Framing Errors
0 Out of Frame, 0 Bit Errors
232
Beta
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Beta