-
NO ADMISSION
CONTROL CAC
no admission-control cac <cac-object-name>
This command is entered in the Interface Configuration Mode. This command
disables CAC from an interface.
-
NO CALL
ADMISSION
no call-admission-control <cac-object-name>
This command is entered in the Admission Control Configuration Mode. This
command deletes the specified CAC object.
-
NO CALL
ADMISSION
no call-admission-control call-priority
This command is entered in the Admission Control Configuration Mode. This
command removes all the priority call related configuration, and exits from the
Priority Configuration Mode.
-
NO CALL
EXTENSION
no call-extension {exact|prefix} <extension> {high|medium}
This command is entered in the Admission Control Priority Configuration Mode.
This command unconfigures the specified priority call.
NO PROTOCOL SIP
no protocol sip [bandwidth|call-threshold]
This command is entered in the Admission Control CAC Object Configuration
Mode. This command is used to remove the parameters set in a CAC object.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
CONTROL
-
CONTROL CALL
Alcatel-Lucent
no admission-control cac
-
PRIORITY
Beta
747