Mode; No Shutdown; No Tunnel Destination; No Tunnel Source - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

MODE

mode {gre|ipsec}
D
ESCRIPTION
This command is used to set the mode on tunnel interface.
P
ARAMETERS
gre
ipsec
D V
EFAULT ALUE
By default, tunnel is configured in the GRE mode.
E
XAMPLE
ALU(config-if Tunnel7)# mode gre

NO SHUTDOWN

no shutdown
This command is used to administratively bring up the tunnel interface.

NO TUNNEL DESTINATION

no tunnel destination <ip-address>
The "no" command removes the configured destination IP address configured for
the tunnel.

NO TUNNEL SOURCE

no tunnel source {<ip-address>|<interface-name>}
The "no" command removes the configured source IP address of the tunnel.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Sets the tunnel in GRE mode.
Sets the tunnel in IPsec mode.
Beta
mode
729