Show Logging - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
System Configuration and Monitoring

SHOW LOGGING

show logging
D
ESCRIPTION
This command displays log messages with priority 6 and higher.
P
ARAMETERS
None.
E
XAMPLE
ALU> show logging
!
! Statlog Configuration
!
statlog global logging: enabled
buffer logging: level debugging (7)
buffer logging: size (128 k)
buffer logging: used (49.94%)
console logging: level errors (3)
system logging: level notifications (5)
logging timestamp : enabled
!
2005 Oct 13 03:31:06: %CM-6-LOG:LIVENESS 2[83000019 will report once on failure
2005 Oct 13 03:31:07: %CM-6-LOG: SCAN card removed from slot 2
2005 Oct 13 03:31:07: %CM-5-LOG: SLOT L2 (83000019) is vacated
2005 Oct 13 03:31:08: %CM-6-LOG: LIVENESS 2[83000019] will report once on failure
2005 Oct 13 03:31:08: %CM-6-LOG: SCAN card removed from slot 2
2005 Oct 13 03:31:09: %CM-5-LOG: SLOT L2 (83000019) is vacated
2005 Oct 13 03:31:09: %CM-6-LOG: LIVENESS 2[83000019] will report once on failure
2005 Oct 13 03:31:12: %CM-6-LOG: SCAN card removed from slot 2
102
Beta
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Beta