Neighbor Activate; Neighbor Advertisement-Interval - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol

NEIGHBOR ACTIVATE

neighbor {<ip-address>|<peer-group-name>} activate
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode.This
command enables the exchange of information with specified neighbor.
P
ARAMETERS
Parameter
ip-address
peer-group-name
D
EFAULT
By default, neighbor is activated when configured.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 activate
NEIGHBOR ADVERTISEMENT
neighbor {<ip-address>|<peer-group-name>} advertisement-
interval <0-600>
D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command sets the minimum interval between the sending of BGP routing
updates.
P
ARAMETERS
Parameter
ip-address
peer-group-name
0-600
D
EFAULT
30 seconds for external peers and 5 seconds for internal peers.
E
XAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 advertisement-
interval 77
420
Beta
Neighbor's IP address.
Name of a BGP peer group.
-
INTERVAL
Neighbor's IP address.
Name of a BGP peer group.
Specify the time in seconds.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Description
Beta