Left running head:
Chapter name (automatic)
T1E1 Line Card
SHUTDOWN
shutdown
D
ESCRIPTION
This command is entered in the controller configuration mode on the T1 controller.
The keyword "shutdown" will administratively bring down the controller.
This command when entered in the interface configuration mode is used to
shutdown the interface. The keyword "no" will bring it up.
P
ARAMETERS
shutdown
E
XAMPLE
ALU(config-controller T1)# shutdown
ALU(config-if serial 0/0:0)# shutdown
234
Beta
Parameter
Alcatel-Lucent
Description
Shuts down the controller (when entered
in the controller configuration mode).
Shuts down the interface (when entered
in the interface configuration mode).
OmniAccess 700 CLI Command Reference Guide
Beta