Vrrp Group-Id Description; Vrrp Group-Id Ip-Address - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
VRRP GROUP ID DESCRIPTION
vrrp <1-8> description <string>
D
ESCRIPTION
This command is used in the Interface Configuration mode. This command
assigns a textual description for the VRRP group. The description string can be up
to 80 characters.
P
ARAMETERS
1-8
string
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# vrrp 7 description ALU-vrrp
-
VRRP GROUP
ID
vrrp <1-8> ip <ip-address>
D
ESCRIPTION
This command enables VRRP for the specified group with the specified ID on the
interface and specifies a primary IP address for the group. A VRRP group is
enabled only after the primary IP address is configured on the interface.
P
ARAMETERS
1-8
ip-address
E
XAMPLE
ALU(config-if GigabitEthernet7/0)#vrrp 5 ip 10.91.0.8
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
-
IP ADDRESS
Parameter
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
Specifies the group number. It is in the
range 1 - 8.
A descriptive text ranging from 1 - 80
characters.
Description
Specifies the group number. It is in the
range 1 - 8.
Primary IP address of the VRRP group.

vrrp group-id description

143
Beta