No Ip Domain-Name; No Ip Host; No Ip Host-Max-Age; No Ip Name-Server - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
DNS (Domain Name Service) Client
-
NO IP DOMAIN NAME
no ip domain-name <name>
This command is used to remove the default domain name.

NO IP HOST

no ip host <name> [<ip-address>]
This command is used to remove a static address mapping for a host. If the
address is specified, the removal is successful only if the exact mapping exists.
-
NO IP HOST MAX
no ip host-max-age <30-31556952>
This command deletes the configured a host-max-age, and resets to its default.
-
NO IP NAME SERVER
no ip name-server <ip-address...> [{prefer|primary|secondary
|tertiary}]
This command is used to remove a name server. If the ordinal is specified, the
removal is only successful if the given address is in that ordinal location.

SHOW HOSTS

show hosts
D
ESCRIPTION
This command shows all the configuration parameters, and all learned name/
address mappings.
P
ARAMETERS
None.
E
XAMPLE
ALU(config)# show hosts
Default domain is abc.com
Domain list: test1, test
Name/address lookup uses domain service
Name server(s): 1.1.1.1, 1.1.1.2, 1.1.1.3
Dynamic host maximum age (seconds): 300
Address
---------------
64.233.187.99
216.109.112.135
856
Beta
-
AGE
Type
-------
static
dynamic
Alcatel-Lucent
TTL Name
----- ------------
www.google.com
294 yahoo.com
OmniAccess 700 CLI Command Reference Guide
Beta