Left running head:
Chapter name (automatic)
Router Information Protocol
NEIGHBOR
neighbor <neighbor-address>
D
ESCRIPTION
This command is used in the Router Configuration mode. This command defines
a neighboring router to exchange the routing information.
P
ARAMETERS
Parameter
neighbor-address IP address of a peer router with which routing information
D
V
EFAULT
ALUE
No neighboring routers are defined.
E
XAMPLE
ALU(config-router rip)# neighbor 172.19.3.1
-
NO AUTO
SUMMARY
no auto-summary
The 'no' command disables auto-summary, and sends sub-prefix routing
information across classfull network boundaries.
-
NO DEFAULT
INFORMATION ORIGINATE
no default-information originate
This command disables the control distribution of default information.
-
NO DEFAULT
METRIC
no default-metric <1-16>
This command sets the metric of redistributed routes to its default.
NO DISTANCE
no distance <1-255>
This command sets the administrative distance to default. The default value for
RIP it 120.
386
Beta
will be exchanged.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta