Admission-Control Cac - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
ADMISSION CONTROL CAC
admission-control cac <cac-object-name>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command is
used to enable CAC on an interface.
P
ARAMETERS
cac-object-name
D V
EFAULT ALUE
None.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# interface GigabitEthernet3/0
ALU(config-if GigabitEthernet3/0)# admission-control cac mycac
R H
ELEASE ISTORY
Release 2.3: command was introduced.
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
Name of the CAC object.

admission-control cac

741
Beta