No Duplex; No Flowcontrol; No Mtu; No Speed - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

NO DUPLEX

no duplex
This command restores the default duplex operation. The default on a GE
interface is auto.

NO FLOWCONTROL

no flowcontrol {receive|send} {off|on}
This command resets the configured flowcontrol on a GigE interface to its default.
By default, the flowcontrol option is "off".

NO MTU

no mtu
This command restores the interface default Maximum Transmission Unit
(MTU).The default MTU is 1500.

NO SPEED

no speed
This command is entered in the Interface Configuration mode. This command
resets the interface speed to its default value, which is 1000.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Alcatel-Lucent
no duplex
155
Beta