Police - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

POLICE

police {committed-rate <8000-10000000>} [commit-action
{drop|set {ecn-ce|fr-becn|fr-de|fr-fecn|ip-dscp {<0-63>|<dscp-
mnemonics>}|ip-precedence {<0-7>|<precedence-mnemonics>}|tos
{<0-15>|<tos-mnemonics>}|transmit}] [committed-burst {<40-
150000> exceed-action {drop|set {ecn-ce|fr-becn|fr-de|fr-
fecn|ip-dscp {<0-63>|<dscp-mnemonics>}|ip-precedence {<0-7>|
<precedence-mnemonics>}|tos {<0-15>|<tos-mnemonics>}|transmit}]
[excess-burst {<40-150000> violate-action {drop|set {ecn-ce|fr-
becn|fr-de|fr-fecn|ip-dscp {<0-63>| <dscp-mnemonics>}|ip-
precedence {<0-7>|<precedence-mnemonics>}|tos {<0-15>|<tos-
mnemonics>}|transmit}][peak-rate <8000-10000000>]
D
ESCRIPTION
This command sets the QoS traffic policing parameters on the traffic class. This
command is used in the Class mode. This command is used to apply policing on
the traffic class. The committed-rate keyword is compulsory. The excess-burst
keyword must be given if exceed-action parameter is set.
Action could be any one of the following:
1. Drop
2. Transmit
3. Set (marks the packet either in IP-precedence or IP-DSCP fields)
P
ARAMETERS
8000-10000000
40-150000
40-150000
8000-10000000
D V
EFAULT ALUE
The default value for Commit Action is Transmit. The default value for Exceed
Action is Drop. The default value for Violate Action is Drop.
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config-qos-P1-C1)# police committed-rate 9600 commit-action
transmit committed-burst 1500 exceed-action drop
R H
ELEASE ISTORY
Release 2.3: Parameter {fr-becn|fr-de|fr-fecn} was added.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Police Committed Rate.
Police Committed Burst.
Police Excess Burst.
Police Peak rate.
Beta
police
787