Logging Remote; Service Timestamps Log - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

LOGGING REMOTE

logging remote <ip-address> [port <0-65535> priority <0-7>]
D
ESCRIPTION
Use this command to configure an external server to store log messages.
P
ARAMETERS
ip-address
0-65535
0-7
D V
EFAULT ALUE
The default port is 514 and the default priority level is 7.
E
XAMPLE
ALU(config)# logging remote 1.1.1.1

SERVICE TIMESTAMPS LOG

service timestamps log
D
ESCRIPTION
This command is used to display the date and time of the log messages.
P
ARAMETERS
None.
D V
EFAULT ALUE
By default, Service timestamps log is enabled.
E
XAMPLE
ALU(config)# service timestamps log
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
IP address of the external log server.
UDP port number of the external log
server.
Priority level of the messages.
Beta
logging remote
65