Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual page 37

Left running head:
Chapter name (automatic)
OmniAccess 700 CLI Command Reference Guide
P IV - P C
ART ACKET
This part consists of Chapter 20
Common Classifier commands. These commands are generic across all
applications. You are required to have a thorough knowledge of this chapter
before you proceed to configure the NATs, Filters, etc.
P V - R P
ART OUTING
The aim of the fourth part is to get the most out of addressing and routing. The
routing function moves data through the network efficiently and finds new paths
when network changes occur. Routing also affects how large the network can
grow - that is, the complexity of the topology and the stability of the network as it
expands.
All the chapters in this part focus on configuring the routing services.
Chapter 21
commands that are generic across all routing protocols. You are required to have
a thorough knowledge of this chapter before you proceed to configure the RIP,
OSPF and BGP.
Chapter 22
Protocol" and Chapter 24
commands for configuring RIP, OSPF and BGP routing protocols.
Chapter 25
OA-700.
Chapter 26
Routing (PBR) configuration on the OA-700.
Chapter 27
configuring Virtual Routing and Forwarding Customer Edge on OmniAccess-700.
4
Beta
LASSIFICATION
"Common Classifiers"
ROTOCOLS
"Protocol Independent Features"
"Router Information Protocol"
"Open Shortest Path First"
"Multicast Routing" provides Muticast routing configuration on the
"Policy Based Routing"
"Virtual Routing and Forwarding"
Alcatel-Lucent
that focuses on
lists the protocol independent
and Chapter 23
provides configuration
covers the commands for Policy Based
covers the CLI commands for
OmniAccess 700 CLI Command Reference Guide
"Border Gateway
Beta