Set Community - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

SET COMMUNITY

set community {<1-4294967295>|AA:NN|additive|local-as|no-
advertise|no-export|none}
D
ESCRIPTION
Enter this command in the Route-Map Configuration mode. This command sets
the community attribute.
P
ARAMETERS
Parameter
1-4294967295
AA:NN
additive
local-as
no-advertise
no-export
none
D V
EFAULT ALUE
No BGP communities attributes exist.
E
XAMPLE
ALU(config-route-map)# set community 10
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Specifies the community number.
Community number in aa:nn format.
Adds the community to the already existing communities.
Routes with this community attribute is advertised to the
Local AS only.
Routes with this community attribute is not advertised to any
router.
Specifies that the routes with this community attribute will
not be advertised to any EBGP peer.
Removes the community attribute from the prefixes that
pass the route map.
Alcatel-Lucent
Description
Beta
set community
363