Show Ip Protocols - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Virtual Routing and Forwarding

SHOW IP PROTOCOLS

show ip protocols [vrf <vrf-name>]
D
ESCRIPTION
This command displays the routing protocol information associated with a VRF.
P
ARAMETERS
vrf-name
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# show ip protocols vrf ALU-vrf
Routing Protocol is "ospf 1"
Invalid after 3600 seconds, hold down 5, flushed after 3600 seconds
Router Id 4.4.4.4
Number of Areas in this router 1. 1 normal 0stub 0 nssa
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Routing for Networks:
4.0.0.0/8
Routing Information Sources:
Gateway
4.4.4.1
Distance: (default is 110)
Routing Protocol is "bgp 100"
IGP synchronization is enabled
Automatic route summarization is disabled
BGP Information for VRF: "
Incoming update filter list for all interfaces is not configured
Outgoing update filter list for all interfaces is not configured
Neighbor(s):
Address
Weight
4.4.4.1
Routing for Networks:
Routing Information Sources:
Gateway
4.4.4.1
Distance: external 20 internal 200 local 200
ALU
(config)#
R H
ELEASE ISTORY
Release 2.3: command was introduced.
562
Beta
Parameter
Distance
110
ALU
-vrf"
FiltIn FiltOut DistIn
Distance
20
Alcatel-Lucent
Description
The name of the VRF for which the
protocol information is to be viewed.
Last Update
00:05:56
DistOut RmapIn
Last Update
00:02:12
OmniAccess 700 CLI Command Reference Guide
Beta
RmapOut