Ip Multicast-Routing; Ip Pim Bsr-Candidate - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
IP MULTICAST ROUTING

ip multicast-routing

D
ESCRIPTION
Enter this command in Router Configuration mode. This command enables
multicast routing and forwarding on the OA-700.
P
ARAMETERS
None.
D
EFAULT
Disabled by default.
E
XAMPLE
ALU(config)# ip multicast-routing
-
IP PIM BSR CANDIDATE
ip pim bsr-candidate <interface-name> [<0-30>] [<0-255>>]
D
ESCRIPTION
Enter this command in the Configuration mode. This command is used to
configure the PIM router as BSR candidate. BSR uses specified interface
address.
P
ARAMETERS
Parameter
interface-name
0-30
0-255
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config)# ip pim bsr-candidate GigabitEthernet3/0 1 10
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Name of the interface.
Indicates the hash-mask-length. This value is used to select
one RP.
Indicates the priority of the BSR router.
Alcatel-Lucent
ip multicast-routing
Description
Beta
513