Ip Igmp Join-Group; Ip Igmp Last-Member-Query-Count - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Multicast Routing
-
IP IGMP JOIN GROUP
ip igmp join-group <group-address>
D
ESCRIPTION
Enter this command in the Interface Configuration mode. This command is used
to join specified multicast group.
P
ARAMETERS
Parameter
group-address
D V
EFAULT ALUE
No group is joined by default.
E
XAMPLE
ALU(config-if GigabitEthernet3/0)# ip igmp join-group 226.2.2.2
-
IP IGMP LAST MEMBER
ip igmp last-member-query-count <1-7>
D
ESCRIPTION
Enter this command in the Interface Configuration mode. Use this command to
configure the number of retransmission of group-specific queries.
P
ARAMETERS
Parameter
1-7
D V
EFAULT ALUE
The default last-member-query-count is 2.
E
XAMPLE
ALU(config-if GigabitEthernet3/0)# ip igmp last-member-query-
count 3
526
Beta
Address of the multicast group.
- -
QUERY COUNT
Number of retransmission of group specific query. This is
also called as robustness count.
Alcatel-Lucent
Description
Description
OmniAccess 700 CLI Command Reference Guide
Beta