Clear Ip Bgp Neighbor; Default-Information Originate - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol

CLEAR IP BGP NEIGHBOR

clear ip bgp <neighbor-address> [soft [in|out]]
D
ESCRIPTION
Enter this command in Super User mode. This command performs a reset on the
connection with specified neighbor.
P
ARAMETERS
Parameter
neighbor-address Resets only the specified BGP neighbor.
soft
in|out
E
XAMPLE
ALU# clear ip bgp 1.1.1.1
-
DEFAULT INFORMATION ORIGINATE

default-information originate

D
ESCRIPTION
Enter this command in the Address Family or Router Configuration mode. This
command is used to configure BGP router to advertise default route.
'Redistribution' command should be configured to complete this configuration.
P
ARAMETERS
None.
D
EFAULT
Disabled.
E
XAMPLE
ALU#(config-router bgp AS30)# default-information originate
418
Beta
Triggers soft re-configuration.
Triggers inbound or outbound update.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta