Show Ip Pim State-Info - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Multicast Routing
SHOW IP PIM STATE
show ip pim state-info [<group-address> [<source-address>]
[summary]
D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command displays the PIM upstream (towards RP/Source) and downstream
(towards Receivers) state information.
P
ARAMETERS
Parameter
group-address
source-address
summary
E
XAMPLE
ALU# show ip pim state-info
PIMv2 State information
Flags: M - Nexthop from Mroute, T - Terminating
K - KeepAlive Timer Running, S - SPT bit set
(*,224.1.1.1), JOINED 00:00:55/00:00:05, RP 5.5.5.5, flags:
Incoming interface: GigabitEthernet3/1, RPF neighbor 5.5.5.5
Downstream interface state:
GigabitEthernet3/0, 00:00:55, flags:A
inherited_olist: GigabitEthernet3/0
524
Beta
-
INFO
Shows the PIM upstream/downstream states for given
group. It includes all (*,G) and (S,G) states.
This options needs to be specified with group address and
used to view all the (S,G) PIM states for specified S and G.
Gives summary of (*,G) and (S,G) states.
Alcatel-Lucent
Description
OmniAccess 700 CLI Command Reference Guide
Beta