Default-Information Originate - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Open Shortest Path First
-
DEFAULT INFORMATION ORIGINATE
default-information originate [always] [metric <0-16777214>]
[metric-type <1-2>] [route-map <route-map name>]
D
ESCRIPTION
This command is used in the Router Configuration mode. This command forces
the autonomous system boundary router to distribute a default route into the
OSPF routing domain.
P
ARAMETERS
Parameter
always
0-16777214
1-2
<route-map name> Routing process will generate the default route if the route
D V
EFAULT ALUE
Disabled.
E
XAMPLE
ALU(config-router ospf 30)# default-information originate
always metric 100
464
Beta
Always advertises the default route regardless of whether
the software has a default route.
Metric used for generating the default route. If you do not
specify a value using the default-metric router configuration
command, the default metric value is 10. The value used is
specific to the protocol.
External link type associated with the default route
advertised into the OSPF routing domain. It can be one of
the following values:
1—Type 1 external route
2—Type 2 external route
The default is type 2 external route.
map is satisfied.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta