Address Family - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Virtual Routing and Forwarding

ADDRESS FAMILY

address-family ipv4 unicast [vrf <vrf-name>]
D
ESCRIPTION
Enter this command in the BGP Routing Configuration mode.
This command associates the address family with the VRF and enters the
address-family configuration mode. If the VRF name is not specified, then the
configurations are associated with the Default VRF.
P
ARAMETERS
ipv4
unicast
vrf-name
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# router bgp 30
ALU(config-router bgp AS30)# address-family ipv4 unicast vrf
ALU_vrf
ALU(config-router-af-ucast)#
R H
ELEASE ISTORY
Release 2.3: command was introduced.
542
Beta
Parameter
Alcatel-Lucent
Description
Address family.
Address family modifier.
The name of the VRF to which the
address family is to be associated.
OmniAccess 700 CLI Command Reference Guide
Beta