Package Install - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
System Configuration and Monitoring

PACKAGE INSTALL

package install {fpkey:|ftp:|http:|https:|tftp:|user:|vrf <vrf-
name>}
D
ESCRIPTION
This command installs a release or a component package from the given location.
The package file can be obtained from user area or fpkey: or it can be obtained
from a remote site using FTP, TFTP, HTTP, HTTPS, or through an inteface
associated with the specified VRF.
P
ARAMETERS
fpkey:
ftp:
http:
https
tftp
user:
vrf-name
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
The following command installs a package after downloading it from remote site
using ftp:
ALU(config)# package install ftp:
Remote Host : 10.91.0.87
Remote Port [ Enter for default ] :
Path/Filename : /packages/alu-apps.2.1.22.1.npm
Username [Enter for none] : user1
Password :
Downloading remote file. This could take a while...
Verifying package... NPM v1.0 format
OK.
Checking the package type ... Release: 2.1.22.1
74
Beta
Parameter
Alcatel-Lucent
Description
Install the package from fpkey:
Download the package to be installed
through ftp from remote file system.
Download the package to be installed
through http from remote file system.
Download the package to be installed
through https from remote file system.
Download the package to be installed
through tftp from remote file system.
Install the package from user area.
Download the package to be installed
through an inteface associated with the
specified VRF.
OmniAccess 700 CLI Command Reference Guide
Beta