Crypto Ike Identity; Crypto Ike Key - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

CRYPTO IKE IDENTITY

crypto ike identity <name> [force]
D
ESCRIPTION
This command configures an IKE identity. Entering this command changes the
mode to IKE identity mode.
P
ARAMETERS
name
E
XAMPLE
ALU(config)# crypto ike identity exampleIdentity

CRYPTO IKE KEY

crypto ike key <key-string> [vrf <name>] peer <peer-address>
[force]
D
ESCRIPTION
This command is used to configure a pre-shared key. The Pre-shared key is used
to authenticate peers. This key should be same on both the IPsec gateways. It is
denoted in the form of a key-string.
P
ARAMETERS
key-string
vrf <name>
peer-address
force
OmniAccess 700 CLI Command Reference Guide
Beta
Parameter
Parameter
Denotes an alphanumeric unique key string. The
IKE key is given by means of a key-string and
supports both string and hex values.
The IKE key is given by means of a key-string.
Currently, the preshared-key length is restricted to
128 characters, and the minimum length is 8
characters.
Name of the VRF.
Peer address/ host name for identification.
Edits or modifies the IKE keys, which are already
configured.
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Description
Identifies the IKE identity.
Description
crypto ike identity
659
Beta