Frame-Relay Lmi-N391Dte; Frame-Relay Lmi-N392Dte - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Frame Relay
-
FRAME RELAY LMI
frame-relay lmi-n391dte <1-255>
D
ESCRIPTION
This command is used to set the full status polling interval on a DTE interface.
P
ARAMETERS
1-255
D V
EFAULT ALUE
The default polling interval is 6.
E
XAMPLE
The following example sets the polling interval to 8.
ALU(config-if Serial0/0:0)#frame-relay lmi-n391dte 8
-
FRAME RELAY LMI
frame-relay lmi-n392dte <1-10>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. It sets the DTE
error threshold.
P
ARAMETERS
1-10
D V
EFAULT ALUE
The default value is 3.
E
XAMPLE
The following example sets the DTE error threshold to 6.
ALU(config-if Serial0/0:0)# frame-relay lmi-n392dte 6
252
Beta
- 391
N DTE
Parameter
- 392
N DTE
Parameter
Alcatel-Lucent
Description
Interval in events when a full status
request is sent out.
Description
DTE error threshold value.
OmniAccess 700 CLI Command Reference Guide
Beta