Match Metric; Maximum-Paths - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Protocol Independent Features

MATCH METRIC

match metric <0-4294967295>
D
ESCRIPTION
Enter this command in the Route-Map Configuration mode. This command
matches the specified metric.
P
ARAMETERS
Parameter
0-4294967295
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-route-map)# match metric 10
-
MAXIMUM PATHS
maximum-paths <number of paths>
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command is used to
configure the maximum number of parallel paths to be allowed in a routing table.
P
ARAMETERS
Parameter
number-of-paths
D V
EFAULT ALUE
By default, OSPF, BGP and Static routes can install a maximum number of 16
ECMP paths. And, RIP installs maximum 8 ECMP paths.
E
XAMPLE
ALU(config-router ospf 1)# maximum-paths 5
356
Beta
Route map result is permit if route metric matches the
specified metric.
Maximum number of parallel routes an IP routing protocol
installs in a routing table, in the range from 1 to 6.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Description
Beta