Aaa Authentication Username-Prompt; Aaa Pre-Authentication Banner - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

AAA AUTHENTICATION USERNAME
aaa authentication username-prompt <prompt-text>
D
ESCRIPTION
This command is used to customize the text, which is displayed to request the
user trying to log in, to enter his user name. The default username-prompt is
"Username:".
The 'no' command brings the default back into effect.
P
ARAMETERS
prompt-text
E
XAMPLE
ALU(config)# aaa authentication username-prompt u1
-
AAA PRE AUTHENTICATION BANNER
aaa authentication banner <delimiter> <multi-lined string>
<delimiter>
D
ESCRIPTION
This command is used to enter a descriptive message to be displayed before the
user is asked for user-name and password credentials.
P
ARAMETERS
delimiter
multi-lined string
delimiter
E
XAMPLE
ALU(config)# aaa authentication banner @Only authorized access
permitted.@
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
PROMPT
Parameter
Parameter
Alcatel-Lucent

aaa authentication username-prompt

Description
The text to be used as prompt for the
user name.
Description
Delimiting character to start the
message. This character will not appear
in the message to be displayed.
The message to be displayed before the
user is asked for user-name and
password credentials. (You can enter a
multi-lined descriptive message.)
Used delimiting character to end the
message.
Beta
43