Igmp Configuration Commands; Ip Igmp Access-Group; Ip Multicast-Routing - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

IGMP C
ONFIGURATION
IP IGMP ACCESS
ip igmp access-group {<1-99>|<access-list-name>}
D
ESCRIPTION
Enter this command in the Interface Configuration mode. This command is used
to deny groups, which are not permitted by access-lists. This restricts the host on
a subnet joining only multicast groups that are permitted by access-lists.
P
ARAMETERS
Parameter
1-99
access-list-name Standard access list name.
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config-if GigabitEthernet3/0)# ip igmp access-group 10
-
IP MULTICAST ROUTING

ip multicast-routing

D
ESCRIPTION
Enter this command in Router Configuration mode. This command enables
multicast routing and forwarding on the OA-700.
P
ARAMETERS
None.
D
EFAULT
Disabled by default.
E
XAMPLE
ALU(config)# ip multicast-routing
OmniAccess 700 CLI Command Reference Guide
Beta
C
OMMANDS
-
GROUP
Access list number.
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

IGMP Configuration Commands

Description
525
Beta