Interface; Mtu - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
L3 Interface Commands

INTERFACE

interface GigabitEthernet <slot/port>
D
ESCRIPTION
This command is entered in the Configuration mode. This command allows you to
configure GigE interface.
P
ARAMETERS
slot/port
D V
EFAULT ALUE
None.
E
XAMPLE
ALU(config)# interface GigabitEthernet 7/0
ALU(config-if GigabitEthernet7/0)#

MTU

mtu <64-1500>
D
ESCRIPTION
This command is entered in the Interface Configuration mode. This command is
used to configure the MTU of the interface, i.e., the maximum size of the
transmitted layer 2 payload.
P
ARAMETERS
64-1500
D V
EFAULT ALUE
The default MTU is 1500 bytes.
E
XAMPLE
ALU(config-if GigabitEthernet7/0)# mtu 1000
154
Beta
Parameter
Parameter
Alcatel-Lucent
Description
Slot and port number of the interface.
Description
Size of packet in bytes in the range 64 -
1500.
OmniAccess 700 CLI Command Reference Guide
Beta