No Fragment Delay; No Service-Policy; No Slippage Mru; Service-Policy - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

NO FRAGMENT DELAY

no fragment delay
The 'no' command sets the fragment delay to default value and hence disables
the fragmentation on MLPPP.
-
NO SERVICE POLICY
no service-policy {in|out} <policy-map name>
The 'no' command detaches the policy map from the interface.

NO SLIPPAGE MRU

no slippage mru
The 'no' command sets the slippage MRU to its default, i.e., 32 MRU.
-
SERVICE POLICY
service-policy {in|out} <policy-map name>
D
ESCRIPTION
This command is entered in the Interface Configuration mode.
This command is used to attach a policy map to the MLPPP interface.
P
ARAMETERS
in|out
policy-map name
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# interface mlppp 100
ALU(config-if mlppp100)# service-policy out P1
R H
ELEASE ISTORY
Release 2.3: command was introduced.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
Ingress or egress direction.
Name of the policy map.
Beta
no fragment delay
307