Area Nssa - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Open Shortest Path First

AREA NSSA

area {<0-4294967295>|<ip-address>} nssa [default-information-
originate] [no-summary] [no-redistribution]
D
ESCRIPTION
Enter this command in Router Configuration mode. Defines an area to be NSSA.
P
ARAMETERS
Parameter
0-4294967295
ip-address
no
redistribution
default-
information-
originate
no-summary
D V
EFAULT ALUE
No NSSA area is defined.
E
XAMPLE
ALU(config-router ospf 30)# area 1 nssa
458
Beta
OSPF area ID as a decimal value.
OSPF area ID in IP address format.
Used when the router is an NSSA ABR and you want the
redistribute command to import routes only into the normal
areas, but not into the NSSA area.
Used to generate a Type 7 default into the NSSA area. This
keyword takes effect only on NSSA ABR or NSSA ASBR.
Allows an area to be a not-so-stubby area but not have
summary routes injected into it.
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Description
Beta