Show Ip Bgp Filter-List; Show Ip Bgp Flap-Statistics - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol
SHOW IP BGP FILTER
show ip bgp filter-list <access-list-number>
D
ESCRIPTION
Enter this command in Super User mode or Configuration mode. This command is
used to display routes that conform to a specified filter list.
P
ARAMETERS
Parameter
access-list-number Number of an autonomous system path access list. It can
D V
EFAULT ALUE
None.
E
XAMPLE
ALU# show ip bgp filter-list 2
SHOW IP BGP FLAP
show ip bgp flap-statistics [{<ip-address>|<ip-address/mask>|
cidr-only|regexp <regexp>|filter-list <1-199>}]
D
ESCRIPTION
Enter this command in Super User mode or Configuration mode. This command
displays the BGP flap statistics of routes.
P
ARAMETERS
Parameter
ip-address
ip-address/mask
cidr-only
regexp
1-199
444
Beta
-
LIST
be a number from 1 to 199.
-
STATISTICS
Network in the BGP routing table.
Network mask applied to the address.
Displays the routes with non-natural netmasks.
Displays routes for all the AS paths that match the regular
expression.
Displays routes conforming to the filter list.
Alcatel-Lucent
Description
Description
OmniAccess 700 CLI Command Reference Guide
Beta