Snmp-Server User - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

-
SNMP SERVER USER
snmp-server user <user-name> [auth {MD5|SHA} <auth-password>
priv DES <privilege-password>]
D
ESCRIPTION
This command is used to configure a SNMPv3 user.
P
ARAMETERS
user-name
auth
MD5|SHA
auth-password
priv
DES
privilege-password
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# snmp-server user user123 auth MD5 pass123456 priv
DES test123456
R H
ELEASE ISTORY
Release 2.3: command was added.
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
A string identifying the name of the
SNMP user.
Indicates that the message sent on
behalf of the user is to be authenticated.
Uses HMAC MD5/SHA algorithm for
authentication.
Password specified for authentication
protocol.
Authentication password should be
minimum of 8 characters.
Indicates the message sent on behalf of
the user is to be protected from
disclosure.
Algorithm used for encryption of the
date.
Privacy password used for encryption/
decryption of the message sent by the
user. This should be a minimum of 8
characters.
Beta

snmp-server user

123