Show Ip Pim Rp-Hash; Show Ip Pim Bsr-Router - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Multicast Routing
SHOW IP PIM RP
show ip pim rp-hash [<group-address>]
D
ESCRIPTION
This command is used to see group to RP mapping. If RP information for the
given group does not exist then command gives error else output shows the RP
information for the given group.
P
ARAMETERS
Parameter
group-address
E
XAMPLE
ALU(config)# show ip pim rp-hash 227.0.0.1
RP 1.1.1.1 (?) Priority - 0 Holdtime - 150, v2
Info source: 1.1.1.1 (?), via bootstrap
Uptime: 00:00:32, expires 00:01:58
SHOW IP PIM BSR

show ip pim bsr-router

D
ESCRIPTION
Enter this command in the Super User mode or Configuration mode. This
command displays the BSR information.
P
ARAMETERS
None.
E
XAMPLE
ALU(config)# show ip pim bsr-router
PIMv2 Bootstrap information
This system is the Bootstrap Router (BSR)
BSR Address: 1.1.1.2 (?)
Uptime: 00:04:24, BSR Priority: 0, Hash Mask Length: 30
Next Bootstrap Message in 00:00:46 seconds
Candidate RP: 2.2.2.1 (GigabitEthernet7/0), Group Acl: test
Next Cand_RP_Advertisement in 00:00:35 seconds
ALU
(config)#
520
Beta
-
HASH
RO address for a given group.
-
ROUTER
Alcatel-Lucent
Description
OmniAccess 700 CLI Command Reference Guide
Beta