Bgp Always-Compare-Med; Bgp Bestpath As-Path Ignore - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Border Gateway Protocol
-
BGP ALWAYS COMPARE

bgp always-compare-med

D
ESCRIPTION
Enter this command in the Router Configuration mode. This command is used to
compare the MED (Multi Exit Discriminator) for paths from neighbors in different
autonomous systems.
Route selection process compares MED for paths from neighbors belonging to
different AS. If this command is enabled, MED is compared among paths
regardless of AS from which paths are received.
P
ARAMETERS
None.
D V
EFAULT ALUE
MEDs per paths from neighbors in different autonomous systems are compared.
E
XAMPLE
ALU(config-router bgp AS30)# bgp always-compare-med
BGP BESTPATH AS

bgp bestpath as-path ignore

D
ESCRIPTION
Enter this command in the Router Configuration mode. This command chooses
the route ignoring as-path as a factor in the algorithm for choosing the route.
P
ARAMETERS
None.
D V
EFAULT ALUE
As-path is considered during BGP best path selection.
E
XAMPLE
ALU(config-router bgp AS30)# bgp bestpath as-path ignore
406
Beta
-
MED
-
PATH IGNORE
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Beta