Show Ip Traffic - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
Virtual Routing and Forwarding

SHOW IP TRAFFIC

show ip traffic [vrf <vrf-name>]
D
ESCRIPTION
This command displays the IP statistics. It can be used to debug the network
problems.
P
ARAMETERS
vrf-name
P S
LATFORMS UPPORTED
OmniAccess 740, 780
E
XAMPLE
ALU(config)# show ip traffic vrf ALU-vrf
IP statistics:
Rcvd:
Frags: 0 reassembled, 0 timeouts, 0 couldn't reassemble
Sent:
ICMP statistics:
Rcvd:
Sent:
ALU(config)#
R H
ELEASE ISTORY
Release 2.3: command was introduced.
564
Beta
Parameter
168 total, 168 local destination
0 format errors, 0 checksum errors, 0 bad hop count
0 fragmented, 0 couldn't fragment, 0 fragments created
11 generated, 11 forwarded
5 encapsulation failed, 0 no route
5 total, 0 errors, 0 dst unreach
0 time exceed, 0 param probs, 0 source quench
0 redirects, 0 echo req, 5 echo rpy
0 timestamp req, 0 timestamp rpy
0 addr mask req, 0 addr mask rpy
10 total, 0 errors, 0 dst unreach
0 time exceed, 0 param probs, 0 source quench
0 redirects, 10 echo req, 0 echo rpy
0 timestamp req, 0 timestamp rpy
0 addr mask req, 0 addr mask rpy
Alcatel-Lucent
Description
Displays the IP statistics in a specified
VRF.
OmniAccess 700 CLI Command Reference Guide
Beta