Line Console Exec-Timeout - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

LINE CONSOLE EXEC
line vty exec-timeout
D
ESCRIPTION
This command is used to configure the timeout (in minutes or seconds) for SSH,
Telnet, and Modem CLI sessions. These sessions close if they are idle for the
specified time.
A zero input specifies that the console CLI should never exit when left idle.
P
ARAMETERS
0-35791
0-60
D V
EFAULT ALUE
The default time-out is 20 minutes.
E
XAMPLE
ALU(config)#line console exec-timeout 0
ALU(config)#line console exec-timeout 45 15
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
-
TIMEOUT
<0-35791> [<0-60>]
Parameter
Alcatel-Lucent

line console exec-timeout

Description
Time-out in minutes.
Time-out in seconds.
Beta
59