No Pfs; No Proposal; No Transform-Set; No Crypto Ipsec Transform-Set - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

NO PFS

no pfs
If this command is entered in the IKE Policy mode, this command resets the PFS
Group to its default.
If this command is entered in the Crypto Map mode, this command disables PFS
completely.

NO PROPOSAL

no proposal
This command deletes the proposal configured for the IKE policy.
NO TRANSFORM

no transform-set

This command detaches the specified transform-set attached to a crypto map,
and applies the 'default' transform set.
Note: A transform-set must be first detached from the crypto map to delete it globally.
NO CRYPTO IPSEC TRANSFORM
no crypto ipsec transform-set <name>
This command deletes a transform-set.

PEER

peer <ip-address>
D
ESCRIPTION
This command attaches a peer to a crypto map. You can attach a maximum of
four peers to a crypto map.
P
ARAMETER
ip-address
E
XAMPLE
ALU(config-crypto-map-exampleMap)# peer 100.10.61.20
OmniAccess 700 CLI Command Reference Guide
Beta
-
SET
-
parameter
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
SET
Description
IP address of the peer.
no pfs
675
Beta