No Pfs; No Shutdown; No Transform-Set; No Tunnel Destination - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

Left running head:
Chapter name (automatic)
IP Security - Virtual Private Network

NO PFS

no pfs
The 'no' command disables PFS completely, when entered in the IPsec Profile
Configuration mode.

NO SHUTDOWN

no shutdown
This command is used to administratively bring up the tunnel interface.
NO TRANSFORM

no transform-set

The 'no' command detaches the specified transform-set attached to the profile,
and applies the 'default' transform set. A transform-set must be first detached from
the profile to delete it globally.

NO TUNNEL DESTINATION

no tunnel destination <ip-address>
The "no" command removes the configured destination IP address configured for
the tunnel.

NO TUNNEL SOURCE

no tunnel source {<ip-address>|<interface-name>}
The "no" command removes the configured source IP address of the tunnel.
702
Beta
-
SET
Alcatel-Lucent
OmniAccess 700 CLI Command Reference Guide
Beta