Clocksource - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

CLOCKSOURCE

clocksource {internal|line}
D
ESCRIPTION
This command is entered in the Controller Configuration mode to set clocksource
for E1 interface. The keyword "clocksource" is used to transmit clock signals. If a
controller is specified as a primary or backup clocksource by the network-clock-
select command, it must be set for clocksource line. Only one T1 or E1 controller
at a time can recover network clock and distribute it to the internal clock generator.
P
ARAMETERS
internal
line
D V
EFAULT ALUE
The default value for clocksource is internal.
E
XAMPLE
The following example configures the E1 clocksource to line:
ALU(config-controller E1)# clocksource line
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Parameter
Alcatel-Lucent
Description
The controller synchronizes itself to the
internal (system) clock.
The controller recovers external clock
from the line and provides the recovered
clock to the internal (system) clock
generator.
Beta
clocksource
209