Area Range - Alcatel-Lucent OmniAccess 700 CLI Command Reference Manual

AREA RANGE

area {<0-4294967295>|<ip-address>} range {<ip-address subnet-
mask|<ip-address/prefix-length>}[not-advertise]
D
ESCRIPTION
Enter this command in the Router Configuration mode. This command specifies
an address range for which a single route will be advertised.
P
ARAMETERS
Parameter
0-4294967295
ip-address
range {<ip-
address subnet-
mask|<ip-
address/prefix-
length>}
not-advertise
D V
EFAULT ALUE
Disabled.
E
XAMPLE
ALU(config-router ospf 30)# area 1 range 10.0.0.0/8 not-
advertise
OmniAccess 700 CLI Command Reference Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Identifier of the area about which the routes are to be
summarized. Area ID specified as a decimal value.
Identifier of the area about which the routes are to be
summarized. Area ID specified as an IP address.
IP address with its mask or prefix length.
Sets the address range status to DoNotAdvertise. The Type
3 summary LSA is suppressed and the component
networks remain hidden from other networks.
Alcatel-Lucent
Description
Beta
area range
459